80% Lower receiver combination sets

80% Lower receiver combination sets.

80% lower receiver combination sets for AR type rifles.  These are made from 7075 T6 Aluminium and are made with the same processes as a normal lower receiver.  The 80% lower receiver is almost complete but has been removed from the rest of the machining process to offer them as 80 percent lowers.  These do not require a FFL transfer They do not have a serial number because they are not a firearm

All machining processes have been completed and within spec except for the following:

Made of 7075 T6 Aluminium here in the U.S.A.

The Machining Operations not yet performed are:

1.  Milling out the receiver interior.

2.  cutting of the Trigger Slot

3.  Drilling of the Trigger Pin Hole

4. Drilling of the Hammer Pin Hole

5.  Drilling of the Selector Hole

***** Due to a New Determination by ATF The selector hole will not be drilled ***

All other Machining process are complete to Spec, all other machine work has been completed.

YES, We have the determination letter from BATFE making these LEGAL 80% receivers.

!
img_0394

AR-15 80% lower receiver jig set combo

AR-15 80% lower receiver jig set combination.
AR-15 80% lower receiver and jig set combination.  This set includes one 80% complete AR-15 Lower receiver and one Jig set made to complete the lower receiver.  The jig set includes two side plates to conform to the sides of the AR-15 Type lower receiver, one master plate to hold the side plates to the lower receiver, and the top guide plates with depth markings.  The guide plates make this 80% lower receiver project simple and easy for all that wish to complete the 80% lower into a operational receiver.  These 80% lowers are the easiest by far than any others to complete.  The only areas to complete are the internal pocket for the fire control parts and the hammer, trigger pin holes, and the selector hole.  The rest of the receiver is made to MIL-SPEC 7075 T6 with all other machine work completed.  Jig Sets will now have the selector hole incorporated into the plate with guide.

LR308 DPMS Style 80% Lower receiver, jig set combination.

LR308 DPMS Style 80% Lower receiver, jig set combination.
LR308 DPMS Style 80% lower receiver and jig set combination for DPMS type Uppers.  This set includes one 80% AR-10 Lower receiver and one Jig set made to complete the lower receiver.  The jig set includes two side plates to conform to the sides of the LR308 DPMS Type lower receiver, one master plate to hold the side plates to the lower receiver, and the top guide plates with depth markings.  The guide plates make this 80% lower receiver project simple and easy for all that wish to complete the 80% lower into a operational receiver.  These 80% lowers are the easiest by far than any others to complete.  The only areas to complete are the internal pocket for the fire control parts and the hammer, trigger pin holes, and the selector hole.  The rest of the receiver is made to SPEC for DPMS type Uppers with all other machine work completed.  Jig Sets will now have the selector hole incorporated into the plate with guide.

80% lower receivers and jig sets

80% Lower receivers for both the AR-15 and AR-10 (DPMS) style weapon platforms, and the combination jig set for both.

80% receiver combination set includes 1ea AR-15 80% complete lower receiver, 1ea AR-10 80% complete DPMS Style Lower receiver, 2 side plates for the AR-15 80% receiver, 2 side plates for the AR-10 80% receiver, 1ea master plate that fits both side plates, 3ea guide plates and screws to hold the master and guide plates.  Side plates are designed to hold the 80% receiver and guide the drilling of the hammer, trigger pin holes, and the selector hole.  They are held to the receiver by the front pivot pin, rear take down pin holes and held on top by the master plate.  The 3 guide plates are made to fit within the master plate to guide the removal of the metal from the internal parts pocket.  Jig Sets will now have the selector hole incorporated into the plate with guide.