Tools

Helpfull tools for your AR-15 M-16

!

M-16 AR-15 Bolt tool

M-16 AR-15 Bolt tool.

AR-15/M16 Bolt Tool Aluminum fixture securely cradles bolt and prevents flying parts. Threaded steel shank captures and compresses ejector spring and aligns roll pin for easy removal with punch, loosens gradually to relieve spring tension. Works equally well for bolt assembly. Compact and light enough to take to the field. A must for all AR-15/M16 shooters.

Armorer’s Barrel Wrench

Armorer’s Barrel Wrench

Armorer’s Barrel Wrench Install and disassemble barrel nut, free float tubes, compensator, barrel extension tube, and carbine stock. 1/2 drive for socket wrench and screw driver tip for buttstock screw. Convenient hole for wall hanging made of 4140 steel, w/ manganese phosphate finish.

Broken Shell Extractor tool .223 or 5.56 Nato

Broken Shell Extractor tool .223 or 5.56 Nato

Other calibers available, please specify in notes to us when ordering or send us an e-mail.  others include .308, 7.62 x 39, 30-06.

Broken Shell Extractor tool .223 or 5.56 Nato

Easily remove cracked or broken shell casings that get stuck in the chamber of your rifle.

Armorer’s Action Block

Armorer’s Action Block

This kit protects receiver during removal or replacement of barrel assembly. Totally eliminates any possibility of damage to barrel index pin, or receiver index notch. Fits most models of AR-15/M-16 receivers.

Mag Cinch Multi-Tool

Mag Cinch Multi-Tool

Multi-Tool includes an AR-15/M16 front sight adjustment tool, a Mag Cinch strap tightening device, a bolt face cleaning tool, two disassembly punches, a Phillips screwdriver substitute, and a Lanyard Loop.

CAR Spanner / Bushing Wrench

CAR Spanner / Bushing Wrench

CAR Spanner / Bushing Wrench AR15 carbine stock spanner wrench loosens lock ring on telescoping carbine stocks.

lower receiver block

Lower Receiver Block

Lower Receiver Block

Heavy-duty urethane block takes all the vise clamping force so your valuable lower receiver doesn’t. Versatile block can be inserted into the magazine housing, either from the top or bottom; then clamp the other end into your bench vise. The magazine catch locks to the block; safely and securely holds the rifle in the required position for assembly, disassembly, cleaning or repair. Will not mark or scratch finish.

Front Sight combo tool

Front Sight combo tool

This tool helps adjust the elevation of your front sight by engaging the locking detent and allowing the sight itself to rotate. Works on both 4 prong A-2 and 5 prong A-1 sight posts.

AR-15 M-16 Handguard Removal Tool

AR-15 M-16 Handguard Removal Tool
A newer Design handguard removal tool (HRT) will make removing your handguards a snap!!! Our improved version works on the gun or just the upper receiver thanks to the longer tang on the tool.